Valve clearances

To: [email protected]
Subject: Valve clearances
From: Dave Biggs <[email protected]>
Date: Mon, 21 Sep 1998 15:28:51 +0100
CC: [email protected]
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
Organization: Fujitsu Telecommunications Europe Ltd
Sender: [email protected]

Duncan Miller wrote:

  What should the valve clearances be on the stag. Mine make a racket.
  exhaust = .020 in. and intake= .010 in. . except for #2 exhaust witch
=
  .010 in.?

  Duncan

Duncan,

The exhausts are 16-18 and the inlets 8-10 thou. They are a pain to set
up as you have to keep removing the cam to change the
shims.

Regards,

Dave.

--
        Dave Biggs
        Senior Design Engineer
        Fujitsu Telecommunications Europe Ltd,
        Birmingham Business Park,Solihull Parkway, Birmingham, B37 7YU.
        mailto:[email protected]  tel: 0121 717 6094  efax: 0121 717 6014

Prev by Date: Turn signal help
Next by Date: Re: Stag Differential
Prev by thread: Re: Turn signal help
Next by thread: Dip sticks and tube's
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index