Stag/Stag Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Fwd: Lower rear wing repair
- To: Stag Owners Club <[email protected]>
- Subject: Re: Fwd: Lower rear wing repair
- From: Dave Biggs <[email protected]>
- Date: Mon, 15 Dec 1997 09:21:13 +0000
- Content-Transfer-Encoding: 7bit
- Content-Type: text/plain; charset=us-ascii
- Organization: Fujitsu Telecommunications Europe Ltd
- References: <[email protected]>
- Sender: [email protected]
I fitted rear wing repair panels which reach up to a few inches above
the swage line from the B post back to just behind the wheelarch.
I had a similar problem with the area where the wing meets the boot
floor. I made repair panels myself using the left overs from the repair
panel pressing which had some suitable sections that were slightly
curved both ways. The end result was good and the welded seams were
leaded to hide any imperfections.
Another way is to buy new rear wings which are extremely expensive !
Regards,
Dave.
--
Dave Biggs
Senior Design Engineer
Fujitsu Telecommunications Europe Ltd,
Birmingham Business Park,Solihull Parkway, Birmingham, B37 7YU.
mailto:[email protected] tel: 0121 717 6094 efax: 0121 717 6014
Home |
Archive |
Main Index |
Thread Index