Re: Spider transmission rebuild

To: "Ritchie, Jason" <[email protected]>, "'[email protected]'" <[email protected]>
Subject: Re: Spider transmission rebuild
From: [email protected] (Greg Hermann)
Date: Mon, 22 Apr 2002 15:54:16 -0700
Content-type: text/plain; charset="us-ascii"
Reply-to: [email protected] (Greg Hermann)
Sender: [email protected]

>The transmission bearings seem fine on inspection but the gears wobble
>noticeably on the mainshaft.  Can anyone give me advice on replacing the
>bushings in the gears.

Stock clearance on these bushings is quite loose, they WILL seize if set up
tighter !!

 Do I need to take them to a machine shop to have
>them reamed to size after they are pressed in?

Honed would be more appropriate.

Greg

 Any tips on rebuilding the
>transmission would also be helpful.
>
>Jason Ritchie
>74 Spider
>Boise, Idaho
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Prev by Date: [no subject]
Next by Date: Re: Alfa 164: rear emblem replacement
Previous by thread: Spider transmission rebuild
Next by thread: AROCt Lime Rock event, the return of Mortimer!
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index