Re: O.D./clutch hydraulics

[FMags2@domain.elided]

<< You should be able to bleed the clutch just by opening the bleed valve on
   the slave cylinder and letting the fluid work its way through.  However,
   the slave cylinder is often inmcorrectly fitted by DPO the wrong way up,
   with the fluid inlet connection at the top and bleed valve at the bottom. 
   The bleed valve needs to be at the top in order to get all the air out. >>
 
 Mike, you were exactly right.  I switched it around and just need to bleed 
it now.  Thanks,
 Frank Magnusson >>