Stag/Stag Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Reinforced hoses
- To: Stag List <[email protected]>
- Subject: Reinforced hoses
- From: Dave Biggs <[email protected]>
- Date: Fri, 30 Apr 1999 13:14:31 +0100
- Content-Transfer-Encoding: 7bit
- Content-Type: text/plain; charset=us-ascii
- Organization: Fujitsu Telecommunications Europe Ltd
- Sender: [email protected]
I bought a new hose from Rimmers that goes from the radiator to the
expansion bottle. I was surprised to see that it was unreinforced,
looked like it had been hacked off the end of a reel and the internal
diameter looked a bit on the large side.
It will probably be OK as it is only a small diameter pipe relative to
the wall thickness but I wasn't impressed !
I only ordered it from Rimmers as I was ordering some SD1 bits at the
same time. I tend to favour James Paddock or SOC.
Regards,
Dave.
--
Dave Biggs
Senior Design Engineer
Fujitsu Telecommunications Europe Ltd,
Birmingham Business Park,Solihull Parkway, Birmingham, B37 7YU.
mailto:[email protected] tel: 0121 717 6094 efax: 0121 717 6014
Home |
Archive |
Main Index |
Thread Index