RE: Oil and Filter Change

[Richard Brake <richard.brake@domain.elided>]

If you; take the spark plugs out and remove the coil. You should be able
to get the required oil pressure by cranking on the starter. 

This is a bit extreme for an oil change, I only use this procedure on
rebuilt engines before firing them up.


Richard  Brake
richard.brake@domain.elided

	-----Original Message-----
	From:	PGAHOWELLS@domain.elided [SMTP:PGAHOWELLS@domain.elided]
	Sent:	02 March 1999 19:41
	To:	john.h.clayton@domain.elided; stag-digest@domain.elided
	Subject:	Re: Oil and Filter Change


	I tried spinning the engine without coil lead. but not enough
cranking power
	to really get the pressure up. 
	Seems I am generally OK.
	Thanks again.
	Peter H.