Re: Oil and Filter Change

[Dave Biggs <D.Biggs@domain.elided>]

<snip>
> I am always a bit concerned starting up with no pressure.
<snip>

Definitely fill the oil filter with as much oil as possible before
fitting it.

I tend to pull the inertia switch and the wire off the coil, then crank
it on the starter until the oil pressure comes up, then reconnect, run
the engine for a few minutes, leave it to stand for 15mins and then top
up as necessary.

This may be of no benefit whatsoever but it makes me feel better !

Dave.

-- 
	Dave Biggs                       
	Senior Design Engineer 	
	Fujitsu Telecommunications Europe Ltd, 
	Birmingham Business Park,Solihull Parkway, Birmingham, B37 7YU.
	mailto:D.Biggs@domain.elided  tel: 0121 717 6094  efax: 0121 717 6014