Re: My Stag

To: Mike Wattam <[email protected]>
Subject: Re: My Stag
From: Tom Jell <[email protected]>
Date: Mon, 10 Aug 1998 22:57:57 +0200
CC: TSR Mailing List <[email protected]>
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
References: <[email protected]>
Reply-To: [email protected]
Sender: [email protected]

Mike

was necessary to take the head off again. Preasure test showed exactly
where it came out.

There "opended" up a hole just beside the core plug ... exactly outside
the head gasket. I assume alloy was very thin due to skimming and inside
corrosion.

As welding requires to skim the head afterwards and I have to take the
head to a machine shop I tryed it the DIY way ...

I filled the hole with some liquid alloy which becomes rather hard after
drying, sanded the surface and added some sealing (handmade from the old
head gasket).

Tom

Prev by Date: Tyres
Next by Date: Re: Flushing Cooling system & Thermostat
Prev by thread: Tyres
Next by thread: Re: My Stag
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index