Stag/Stag Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Fwd: Re: Oil & Filters - Advice please!]



-- 
	Dave Biggs                       
	Senior Design Engineer 	
	Fujitsu Telecommunications Europe Ltd, 
	Birmingham Business Park,Solihull Parkway, Birmingham, B37 7YU.
	mailto:[email protected]  tel: 0121 717 6094  efax: 0121 717 6014

-- BEGIN included message

Chris,

Glad to hear that you have found a Stag.

The problems with the oil filters is exactly the same as the Dolomite, I
believe that Unipart did produce a redesigned filter which solved this
problem. 

The spin on oil filter arrangement looks very convenient but I have
heard stories of poor tolerances allowing oil to by pass the filter ! I
don't know if this applies to the Rimmer units. 

I would say that the 15/40 oil was OK particularly if you intend to use
it in the winter.

Regards,

Dave.
-- 
	Dave Biggs                       
	Senior Design Engineer 	
	Fujitsu Telecommunications Europe Ltd, 
	Birmingham Business Park,Solihull Parkway, Birmingham, B37 7YU.
	mailto:[email protected]  tel: 0121 717 6094  efax: 0121 717 6014

-- END included message


Home | Archive | Main Index | Thread Index