Re: Driveline problems

To: Tim Buja <[email protected]>
Subject: Re: Driveline problems
From: Glenn Merrell <[email protected]>
Date: Tue, 23 Jun 1998 21:53:19 -0600
CC: Stag Mailing List <[email protected]>
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
Organization: Freelance Consulting <http://www.netcom.com/~gmerrel/
References: <[email protected]>
Sender: [email protected]

Hello Tim and All,
    As I think someone may have already stated, the whine comes from
improper meshed pinion to ring.  When you dissassemble the diff, the
wear pattern should be exactly in the middle of the gear.  If the wear
is to the left or right, it is the depth of the pinion.  One side's wear
pattern causes a whine on acceleration, the other side's pattern on
deceleration.  A rebuild of the diff with a new crush bush/shims is
required, so replace the pinion gears and seals at the same time.
(Humm, mine is on jacks and axles off, maybe I should drop the diff?)

Regards,
Glenn Merrell
"Keep Your Stag Cool, Install a NEW Composite Cowl Today"
Click on the link below to visit the Stag Radiator Cowl Site:
http://pw1.netcom.com/~gmerrel/stagcowl001.html

References:
- Driveline problems
  - From: Tim Buja <[email protected]>

Prev by Date: Re: Driveline problems
Next by Date: Re: Driveline problems
Prev by thread: Re: Driveline problems
Next by thread: Re: Driveline problems
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index