Hi all Here is one of the replies for general interest. Peter Howells
-- BEGIN included message
- To: PGAHOWELLS <[email protected]>
- Subject: Re: Spax and Koni Rears
- From: Angus Holliday <[email protected]>
- Date: Mon, 13 Apr 1998 10:36:25 -0700 (MST)
- Content-transfer-encoding: 7bit
- Content-type: text/plain; charset=US-ASCII
At 03:28 PM 4/12/98 EDT, you wrote: >Actually *ALL* Konis are adjustable..the main difference between the two is that you must remove the Koni from the car to adjust it. This is rather time consuming.. once removed you push out the rubber bump stop in the top of the out tube and engage the two teeth by fully compressing it and turning the two tubes in relation to each other. The Spax can be set in minutes. In the US a softer set is needed when driving on concrete type freeway as the car "thumps" at higher settings. For twisty road or track work, a stiff setting is best. Koni's idea of adjustment is more to compensate for wear hence the time-consuming process. Angus \=/, _-===-_-====-_-===-_-==========-_-====-_ | @___oo ( Walter Angus Holliday )_ /\ /\ / (___,,,}_--= Stag Specialists ) ) /^\) ^\/ _) =__ )850 East Teton #3 ) /^\/ _) (_ Tucson, Arizona USA / / _) / ) Phone 520 792 0294 /\ )/\/ || | )_) (_ FAX 520 746-1336 ) < > |(,,) )__) (Email [email protected] ) || / \)___)\ (_ __) | \____( )___) )___ -==-_____-=====-_____-=====-___== \______(_______;;; __;;;
-- END included message