Re: Heater

[Dave Biggs <D.Biggs@domain.elided>]

Andrew Burt wrote:
> 
> Hi all
> I am looking for some pointers as my heater just stopped working, its on
> a Mk I with A/C (which I haven't used) and the heater used to work !
> I have checked that the flaps close off the air channels, and there
> appears to be vacuum on some of the lines - any ideas ?
> Andrew


You could check that the valve which allows water through the heater is
opening. This is positioned on the right of the centre console where the
pipes leave the matrix. It is controlled by the hot-cold lever.

Otherwise it could be that the matrix is blocked by sludge !

Regards,

Dave.

-- 
	Dave Biggs                       
	Senior Design Engineer 	
	Fujitsu Telecommunications Europe Ltd, 
	Birmingham Business Park,Solihull Parkway, Birmingham, B37 7YU.
	mailto:D.Biggs@domain.elided  tel: 0121 717 6094  efax: 0121 717 6014