Re: FYI: Scout 800 front body mount removal

To: [email protected]
Subject: Re: FYI: Scout 800 front body mount removal
From: "Gary Billings" <[email protected]>
Date: Mon, 09 Nov 1998 19:35:47 -0700
Content-Length: 659
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
Organization: MailCity (http://www.mailcity.lycos.com:80)
Reply-To: "Gary Billings" <[email protected]>
Sender: [email protected]

Another IH "good" quality:  While lifting the body up, I couldn't figure out why the engine was being lifted too!  Guess those fan blades and shround are stronger than you think!  Good thing I noticed it before I decided to start it up.  Anyway, I've got all the bushings replaced with 5/8" rubber made for semi's.  I haven't taken her out for a rough ride - yet.



>Ooops.  You should've read the FAQs on doing the Scout II mounts... always
>remove the shroud and lay it back on the motor before you attempt to lift
>the body up... ;)
>


Get your FREE E-mail at http://mailcity.lycos.com
Get your PERSONALIZED START PAGE at http://personal.lycos.com

Prev by Date: RE:RE:Regarding TomM
Next by Date: Uh-Oh
Prev by thread: Re: FYI: Scout 800 front body mount removal
Next by thread: Slipping tranny revealed!
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index