[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
<E28> 535i hesitation.. checked a few things..
- Subject: <E28> 535i hesitation.. checked a few things..
- From: "Ron J" <ron@xxxxxxxxxxxxxxx>
- Date: Tue, 8 Apr 2003 20:14:19 -0400
I just got back from outside, after taking a break from the books., I took
the bellows off and checked for cracks, not one found. I checked all the
other hoses, and no cracks there either. I checked the coil, and the coil
wire and no corrosion or burnt contacts, and someone suggested might have
been, I checked the temp sensor plugs. The red blue one was good, and the
green one;s plug housing was cracked but the contacts were good, Air flow
meter flap seemed to move freely, and so did the throttle body flap. The
only hose (already mentioned) that has any cracks in it, and will be
replaced tommorrow is the one that comes off the front of the bellows, and
goes into an inlet on the valve cover, and also has a small 1/4 inch hose
going down off the bottom of it towards underneath the engine somewhere.
Its $11.00 at the dealer, and I will be replacing it.
The main reasons I have been hearing is the computer, or the temp sensors..
Any other suggestions?
Thanks
Ron J
------------------------------