[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: 325i instrumentation panel
- Subject: RE: 325i instrumentation panel
- From: "Aceto, Anthony J." <TACETO@xxxxxxxxxxxx>
- Date: Mon, 3 Mar 2003 14:36:11 -0500
It sounds like you're on board SI batteries are dying. They can be replaced
by pulling the instrument cluster, take out the SI board, desolder the old
batts, and solder the new ones in.
- -----Original Message-----
From: Carl Parisien [mailto:[email protected]]
Sent: Monday, March 03, 2003 2:29 PM
To: [email protected]
Subject: 325i instrumentation panel
Hello
I have a 1992 325i - the car's instrumentation panel (ie: speedometer,
tachometer) works only intermitently. Most of the time the gauges dont work
- - ie: the needles are flat, as if the entire panel has been disconnected.
Occaisionally, they kick in and work properly. Doesn't appear to be a
pattern. Does anyone have any ideas on what might be causing this problem. ?
thanks carl
- --
to be removed from bmw, see /bin/digest-subs.cgi
or email "unsubscribe bmw" to [email protected]
------------------------------