[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE:<e28> ABS sensor

Thanks for the reply. I've now cleaned the ABS gear, pried out the sensor
and cleaned it up. Still don't have enough signal to keep the pump from
running at slow speed, although it may be slightly better, as in
occasionally it doesn't run.

What is the correct orientation of the diamond shaped head on the sensor
relative the the abs gear?

Thanks.

doug

- -----Original Message-----
From: bmrfamly [mailto:[email protected]]
Sent: Sunday, November 03, 2002 6:50 AM
To: Doug Dykaar
Subject: ABS sensor


Sir
   I've had to wire-brush the ABS gear wheels, and clean the head of
the ABS sensors.
   I've also had to reposition the sensors to get a "better" signal.
   If that fails, They should be available in salvage yards.

------------------------------