Re: Rears a pain

[Elcrinv@xxxxxxx]

The holding screws are a PITA. Whenever I take off rear rotors I first soak 
the screws with PB blaster then insert the Allen wrench and give it a couple 
of wacks with said BFH. This usually works. They hang up on the rotor not the 
threads. If still stuck just drill them out and use a bigger BFH to knock 
rotors off.  The remains will come out easily with needlenose pliers or 
equivalent gripper. Thanks to the late and very lamented Jeff Harker for this 
advice.
Replacing the screw is optional as the rotors will hold in place nicely 
without it. Dealer has lots of those screws though
Fred Callender RMC

------------------------------