'84 BMW 318i SCCA ITB Racer - REDUCED

["Michael Wendell" <mwendell@xxxxxxxxxxx>]

1984 318i Fully Prepared for ITB, raced in competitive SCCA MARRS
series. Thirteen races in '98, '99, and '00, finishing as high as 2nd
with rookie driver (last raced in July of 2000). This car has lots of
potential, just needs a dedicated driver to win.

  $4,000 obo

Located in Centreville, VA. Free or cheap delivery available in the
mid-atlantic/northeast.

pictures at http://www.kwyjibo.com/ispeed/raceteam. Car is no longer
silver, but was painted white for the 2000 season with M-stripes from
the roof to the tail, along with the diagonal stripes in the earlier
paint schemes.

You can race this car as-is, or, if you're looking for parts to build a
318i for SCCA ITB or the NASA E30 Spec Series, or even to build a 325is,
this is perfect for you. If you're going to use the parts, this includes
all of the safety gear you'll need, plus a killer suspension. All of the
suspension work has been done, so you won't have to work with a machine
shop to get your Ground-Control suspension installed. Simply bolt this
one up.

  DOES NOT INCLUDE ANY OF THE SPARES LISTED ON THE
  WEBSITE, BORBET WHEELS, OR 4.44 QUAIFE DIFF.
  THOSE WILL BE AVAILABLE SEPARATELY

Car:
 - 1984 BMW 318i
 - VIN WBAAK7402E8764133
 - SCCA ID 42-1594, initial approval 10/30/98
 - BRAND-NEW Curry's Auto motor. Built this winter for
   endurance racing & low maintenance, bullet-proof stock
   rebuild. 100% Legal.
 - Stock open differential
 - Superspint 4-2-1 headers
 - Custom open exhaust (never cited for sound)
 - BMW E30 M3 motor mounts
 - K&N intake with cone filter
 - New Sears Diehard battery
 - Newer radiator
 - New hoses
 - New belts
 - Electric fan
 - BMW E36 M3 shift lever
 - MOMO competition shift knob
 - Kirkey Deluxe aluminum road-race seat
 - I/OPort bolt-in cage
 - I/OPort seat-back brace
 - Safecraft 10lb fire system with 2 nozzles
 - Kidde hand held extinguisher
 - Racer Wholesale mesh window net with custom mounting
 - TRW Sabelt five point harnesses (late 1998 date)
 - Wink 5 panel mirror
 - Ground-Control adjustable camber/caster plates
 - Koni single adjustable shocks & struts
 - E30 325is strut tube conversion
 - Ground-Control coil-over sleeves and mounts
 - Eibach 2.5" coil-over springs
 - Eibach adjustable sway bars
 - Relocated/reinforced sway bar mounting
 - BMW E36 M3 sway bar links
 - BMW E30 M3 offset control-arm bushings
 - H&R hubcentric wheel spacers (to fit 225's)
 - Wheel stud conversion (extra long)
 - SCCA-legal front & rear tow hooks
 - Hard-wired AMB transponder (#1482717)
 - Bottlecap Wheels

------------------------------