Service Indicator lights - New Batteries

["Chris Northover" <chris.northover@xxxxxxxxxxx>]

Mike, the batteries you need are just plain old AA rechargables (or any size
really...)  The trick is to unsolder the old batteries off the mother board,
then solder wires in their place, leading to a remote battery holder
containing the two batteries.  Make sure you charge the batteries before
fitting.  Be careful to note where the old batteries were removed from and
which polarity each connection was -  (gets a bit tricky to remember the
right place on the M/B)

Chris Northover, Karori, New Zealand

------------------------------