[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
FS: Z3 autox/hi-performance parts
- Subject: FS: Z3 autox/hi-performance parts
- From: TeamM3@xxxxxxx
- Date: Sat, 25 Nov 2000 10:01:40 EST
Sold my Z3 2.8 coupe used for autox, these are the parts that made it stand
above all the other Z3's, will not fit M roadster/coupe:
1) Koni double adjustable hydraulic shock set
� � - custom made and valved by Koni North America to my specs
� � - rebuilt mid-year by Koni during revalve
� � - includes required modified upper rear shock mounts for larger shaft
diameter
� � - includes custom bracket on front strut for using M3 long endlinks
� � - includes Ground Control adjustable M3 heim-joint front endlinks
� � - soft setting softer than stock Z3 2.8 coupe, stiff setting much stiffer
than stock
� � - enhanced low speed valving for incredible response reactions
� � - bolts on to any 2.5/2.8/3.0 Z3 without any mods by you, maybe 1.9(?)
� � - $900/set ($1600+/new if you can even get them made as described above)
(1) Pair of hand-picked BMW Z3 front spindle axles
� � - for all 1.9/2.5/2.8/3.0 Z3
� � - have maximum factory tolerances favoring camber
� � - worth up to 1/2 deg negative camber
� � - absolute must for SCCA Stock class use, fully legal
� � - value exceeds any price paid
� � - $200/pair, bare
(1) Dinan adjustable 27mm front swaybar
� � - fits 2.5/2.8/3.0 Z3
� � - $125 (over $250 new)
(1) Carbotech brake pad set
� � - fit 2.5/2.8/3.0 Z3, maybe 1.9 Z3 and E36 3 Series (not M's)
� � - 80%+ pad material remaining, new June/2000
� � - Panther compound for front pads
� � - Green/kelated-metallic compound for rear pads
� � - excellent autox & high performance use
� � - $75/entrie set (over $200 new)
(2) K&N stock replacement air filters
� � - fit all Z3 & E36
� � - $15 each (~$40 new)
(1) Supertrap stainless steel muffler for 2.8 Z3
� � - 5" diameter x 19" long, weighs 5 lb.
� � - 2.5" inlet with stainless steel extension pipe
� � - requires custom hanger
� � - otherwise just cutoff muffler and bolt-on to 2.8 Z3 exhaust pipe
� � - may fit other models (60mm OD exhaust pipe)
� � - $100 (over $200 new with extension)
Prices firm, will consider discount for multiple item purchase. Please
respond to:
[email protected]
Mark Sipe
------------------------------