Re: [E36M3] Help needed from RD Sport or Racing Dynamics sway bar

[JSPM3@xxxxxxx]

owner
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL 4.0 for Windows 95 sub 230

In a message dated 1/10/99 7:08:24 AM Pacific Standard Time,
neilmaller@domain.elided writes:

> Set the RD adjustable links to the same length as the fixed stock ones. 
>  Once the car is back on its wheels, the clearances will all be OK. 
>  However during assembly you might possibly need to compress the 
>  suspension just a bit with a jack under the hub or lower control arm.
This will work well or measure the stock links center to center and start with
the adjustable links run out long.  After assembley tighten.  The jack is the
best bet though.  Put the jack under the hub and set the parking brake.  If
your stands are high and your jack has limited reach you can put it under the
edge of the rotor.  Again be sure to set the brake so nothing rotates and
drops the suspension.  Your hands will appreciate this.

Jim

------------------------------