[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Answer to GREY regarding ERAM and other calculations.
- Subject: Answer to GREY regarding ERAM and other calculations.
- From: mark kibort <mkibort@xxxxxxxxxxxxxx>
- Date: Sat, 28 Nov 1998 20:12:05 -0500
Message text written by INTERNET:[email protected]
> GGray >>
On the subject of erams, I responded to mark's e-mail and asked what
formula
he used to explain his hp claims. That was about a week ago.....still
waiting
to hear..
<
>>>>>>>>>>>>>>>
Just responded, been traveling. =
I think that you and others will agree, we all hope for the 20% adder, bu=
t
never seem to find it very easily
Usually, everything that we do, is a pain in the _______ but always
seems to be about a 5 to 7 percent HP adder.
This is not bad, but sure lower than all of our expectations. If you ev=
er
go to a dyno, the dyno graph will always be lower than you would have
hoped. =
I remember everytime feeling so fast because of my loud headers , only to=
find that they only bought a surely welcomed, 12 or so HP average. What=
was surprising was the intake runners, TB and cams when the dyno run was =
45
hp to the rear wheels more.
that was exciting, but was very expensive and a lot of work. =
So, the ERAM was equally surprising as My calculations told me of a 15 to=
20 hp gain , and I only came up with a respectable 9hp.
the Dyno guy was amazed, but after awhile, I was too. After going ba=
ck
thru all of my calculations of air density, pressures, vacuums, and HP
gains expected, I realized all of my measurements were fudged to the
upside. As they added up, they made the expected outcome too high!! =
When I recalculated, the dyno results made perfect sense.
So , the moral of the story is that most all big ticket items only give =
7%
or so. (except forthe big stuff like strokers, and major head work, whi=
ch
the gains are truely impressive) (not challenging Conforti's chips as
they may be more, and truly in line with the big stuff) We are
talking big stuff like , cool air systems, airfilters, cams headers,
throttle bodies, ERAMS, ram air devices, injectors, RRFPRS, wires, oil,
common chips, exhausts, etc)
=
IMO
Mark Kibort
ERAM www innoventions.org
------------------------------