[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 02 seat removal
- Subject: Re: 02 seat removal
- From: Mike & Cheryl Biles <tiramisu@xxxxxxxxxxxxx>
- Date: Fri, 23 Oct 1998 17:00:47 -0500
>Date: Fri, 23 Oct 1998 17:12:15 EDT
>From: [email protected]
>Subject: 02 seat removal
>
>Help! How can I find out the secret to removing the rear bolts from the seat
>rails on an 02. What a pain, I know that there has to be a reasonable way.
>The wrench has no place to go, the rail is so tight.
>Peter
>
>------------------------------
>
Peter,
I used a socket. Adjust the seat so it's as far forward as it'll go and
then flip the back forward (as though you we're going to climb into the
rear seat) Then you should have a strait shot at the bolt. Unbolt it from
the floor and then you can get to the underside of the rails with the seat
out of the car (if you wanted to remove the rails from the seat).
Hope that helps,
Mike Biles '76 '02 (used to have a '75 with Cobra Clubman seats in it)
------------------------------