[Prev][Next][Index][Thread]
<E30> 88 325e - Fuel, Motronic etc... PROBLEMS
-
Subject: <E30> 88 325e - Fuel, Motronic etc... PROBLEMS
-
From: Robert Obando <[email protected]>
-
Date: Thu, 19 Sep 1996 10:45:07 -0700
To all Beemerphiles,
My 88 325e is extremely sick. The initial problem was when the car is first driven, after 2 to 3 blocks the
car would die... no idle... I would need to give it massive throttle to keep it idling. The next thing that
happens (as I am giving it too much throttle) is black smoke would pour out of the exhaust pipe, as seen
through my rear view mirror.
Modifications done to car:
1) Hypertech chip (5 years ago)
2) PFP Catalytic converter (6 months ago)
3) Oxygen sensor (aftermarket) 6 months ago
What I have done to the car as of late:
1) Replace both fuel pumps. (The new external pump buzzes more than the old one)
After no luck troubleshooting I took the car to a Local BMW specialist, this is what he found/repaired:
1) Replaced the airflow meter
2) Replaced the Sparkplugs
3) Replaced the Timing belt and adjusted valves
4) Checked and adjusted idle and CO
5) Replaced Water pump
6) Fan Clutch
Now the car doesnt die anymore but still has a constant random "miss" when idling. In addition, the car has
reduced power when accelerating in the high rpm range (4000-5000). The mechanic also said that at high rpm the
CO and HO levels were too high. His next suggestion was to inspect the ECU and throttle switches...This trial
and error thing is getting old.
This is where I need your HELP. Please offer any suggestions and or recommend any Wizard mechanics where I can
take my car to in the SF Bay Area.
Thanks in Advance
Robert Obando
73 Tii (OUT RCNG)
85 325e 170,000 miles and dying...I think it's dead Jim...