[Prev][Next][Index][Thread]
Diagnostic Socket & SI Reset
-
Subject: Diagnostic Socket & SI Reset
-
From: Jonathan Lukens <[email protected]>
-
Date: Tue, 17 Sep 1996 00:47:52 -0500
I was browsing the General FAQ and came across that entry that outlines the
simple procedure to reset the service & inspection lights...Has enyone ever
done this: jumping pin 19 to pin 7 (in that order) for three seconds in
late model 3-series.
Where is that diagnostic socket anyway. On my M50 engine there's one of
those near the edge of the fusebox and another over by the positve battery
terminal...WHICH IS WHICH?
Jonathan
[email protected]