[Prev][Next][Index][Thread]
<02> Banjo Bolt /Oil Spraybar
-
Subject: <02> Banjo Bolt /Oil Spraybar
-
From: [email protected]
-
Date: Mon, 16 Sep 1996 00:00:28 -0400
After pulling the valvecover looking for my loss of oil pressure, I looked at
the banjo bolt and it had no washers or seals on it. Is this normal or should
there be something between the bolt and the spraybar or between the spray bar
and the head? It seemed a little loose also but my book says 10ft lbs on the
banjo bolt, that does not seem very tight but I dont want to strip the
threads out.
Thanks,
[email protected] (Dan Chapman)
1973 2002tii