Re: Fan Clutch Tools

Subject: Re: Fan Clutch Tools
From: Larry Schwarcz <[email protected]>
Date: Sun, 08 Sep 96 07:45:09 -0700
"Steve D'Gerolamo" <[email protected]> writes:
>The fan clutch pulley tool should sell for around $20-25 (over $30 is a bit
>excessive) and the 32mm open end wrench for around $20-50 depending on brand
>(Snap-on gets $86.00 for their's).  Make sure the wrench profile is not too
>thick and that the wrench is long enough or you may have problems grasping
>the nut on the fan clutch.  I sell the pulley tool for $22 and the 32mm
>wrench (Facom) for $26.00 if you cannot find these locally.  SD
>Steve D'Gerolamo c/o The Ultimate Garage,  Emerson, NJ  (201-262-0412)

I bought my Snap-On slim 32mm open-end wrench earlier this year for 
about $35.  Does Snap-On make any other ones that are more (like $86)?

    Later...
      Larry.
______________________________________________________________________________
Lawrence R. Schwarcz, Software Design Engr/NCD      Internet:  [email protected]
Hewlett Packard Company                               Direct:  (408) 447-2543
19420 Homestead Road MS 43LN                            Main:  (408) 447-2000
Cupertino, CA 95014                                      Fax:  (408) 447-2264
Internal-only WWW: http://hpisrhw.cup.hp.com/~lrs/homepage.html
O-
             Copywight (c) 1996 Elmer Fudd.  All wights wesewved.
______________________________________________________________________________