[Prev][Next][Index][Thread]

Wipers and drain plug

Garrett McWilliams comments:

>From: [email protected] (Garrett McWilliams)
>Date: Sun, 04 Dec 1994 00:22:08 +0500
>Subject: Wiper fix and oil drain plug
>
>The windshield wiper section of the FAQ is dead on. I'd been putting off doing
>something about my jerky wipers because I thought it would be a PITA but it
>actually only took about an hour to take apart and clean.  They work just 
>fine now.

Thank you! I believe this section of the FAQ is from my BOHICA tale
of fixing the jerky wipers - which I've gotta do AGAIN - seems like
once a year it needs it. Gonna try a different grease this time in
the hopes the cure lasts longer.. luckily (sorta) since I've done
it before, my wiper now has screws holding the contact plate on, so
the hardest part is removal and reinstallation of the motor.

>Here's another problem though.  Do any of you know the best/easiest way to
>repair the threads on the oil drain plug?  I'd really like to helicoil it, 
>but I'm afraid 
>of getting crap from tapping it out into the engine.  Opinions on whether 
>just pouring
>a bunch of oil down the filler while tapping would be ok?

One way of avoiding MOST of the chips is to grease heavily (with
heavy chassis grease) the tap used to cut the threads for the
helicoil. I'd then flush the engine once to make sure nothing
got left behind.  The pan is supposed to be removable with the
engine in place - but I suspect the front of the engine must be
raised up - a PITA. I'd go for helicoil in place if it was me,
with lots of grease to catch the cuttings.

=======================================
Don Eilenberger
  Bellcore
  331 Newman Springs Rd. RM 3X224
  Red Bank, NJ 07701
=======================================
EMAIL: [email protected]
PHONE: 908-758-3167
FAX:   908-758-3166
=======================================