[Prev][Next][Index][Thread]
2002Ti/Solex PHH sputtering prob
-
Subject: 2002Ti/Solex PHH sputtering prob
-
From: [email protected] (Erik Frank)
-
Date: Wed, 2 Nov 1994 22:16:00 -0600
I've encountered a similiar problem with the PHH solexes on my first 2002.
Check the float levels. They are adjusted by thefuel inlet fittings. Note
how it resembles a micrometer barrel. Check a Haynes manual for the correct
procedure. (I'm not going to attempt it from memory, as there's a lot to
remember)
Anyway, misfiring (usually sputtering) was caused by a lack of fuel in the
float bowl.
(in my case) Also, when you're setting/checking this, use some compressed
air and blow out the idle circuits.
Email me for more details.
Erik Frank
[email protected]