[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bmw] RE: [UUC] Radio serial # ?
Pulling the radio out is so extremely simple - just do it. I think a 2.5mm
allen wrench is all you need. Flip the little tabs out on the bezel -
loosen the socket head screws that are back there. Loosen them as far as
they will go without CRANKING on them. The radio just slides out and all
the wires stay connected. Find the number and write it down.
Slide the radio back in and tighten up the screws (just snug is all they
need to be). Total elapsed time - about 3 minutes.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of [email protected]
Sent: Friday, February 06, 2004 8:55 PM
To: E36M3; [email protected]; [email protected]
Subject: [UUC] Radio serial # ?
Search the ARCHIVES:http://www.mail-archive.com/[email protected]
Hi,
I remember a while back someone posted a maneuver to find out the radio's
serial # w/o removal. Anyone know how to do this?
Thanks
Evan
__________________________________________________________________________
In memory of Michel Potheau - friend, enthusiast, founder of the BMW CCA.
UUC Motorwerks - BMW Performance Fine-tuning and home of the Ultimate Short
Shifter - accept no substitutes! 908-874-9092 . http://www.uucmotorwerks.com
--
to be removed from bmw, see /bin/digest-subs.cgi
or email "unsubscribe bmw" to [email protected]