Alfa Romeo/Alfa Romeo Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [alfa] R&R cylinders/pistons without pulling the engine (1969 GT coupe) ??
Yes, you can do pistons/rings/liners/rod bearings, but not the crank and/or
the mains.
You can also get the timing cover off once the head and oil pan is off, but
if you need to go that far you might as well pull the engine.
I've done it many times, it is not that hard with the right tools and a
little bit of patience. An engine support beam as is commonly used on FWD
cars for transaxle R&R helps make the job a lot easier.
Jeff
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
Gwynne W. Spencer
Sent: Wednesday, March 17, 2004 7:34 PM
To: [email protected]
Subject: [alfa] R&R cylinders/pistons without pulling the engine (1969 GT
coupe) ??
Is it possible to do a block rebuild on a 105 coupe ('69 GTV coupe) without
pulling the engine out of the car?
Gwynne Spencer
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
Home |
Archive |
Main Index |
Thread Index