RE: [alfa] I have a timing problem

To: "Chris B" <christopher@xxxxxxxxxxxxxxxx>
Subject: RE: [alfa] I have a timing problem
From: "Ev Micou" <mdg36@xxxxxxx>
Date: Sat, 6 Mar 2004 11:34:16 -0700
Cc: "ALFA DIGEST" <alfa-digest@xxxxxxxxxx>
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="us-ascii"
In-reply-to: <000c01c415bb$359d1090$5f01a8c0@shotgun>
Reply-to: "Ev Micou" <mdg36@xxxxxxx>
Sender: owner-alfa@xxxxxxxxxx

CHRIS, first you must thoroughly DEGREES the distributor....Use a
commercially available degree-ser.

-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of
Chris B
Sent: Monday, March 29, 2004 11:25 AM
To: [email protected]
Subject: [alfa] I have a timing problem

I have a timing problem. When my no. 1 piston is TDC my distributor is
pointing to 100 degrease. It's my understanding it should be pointing to 60
degrease. How do I fix this? Please reply. You can reply directly if needed.

Thanks in advance,

Christopher
88' Alfa spider
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

References:
- [alfa] I have a timing problem
  - From: Chris B

Prev by Date: [alfa] Finding top dead center
Next by Date: [alfa] I'm having a timing problem
Previous by thread: [alfa] I have a timing problem
Next by thread: Re: [alfa] I have a timing problem
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index