[alfa] Re: Crank pulley nut size in 164

To: alfa@xxxxxxxxxx
Subject: [alfa] Re: Crank pulley nut size in 164
From: Thomas Washburn <thomasw@xxxxxxxxxx>
Date: Mon, 13 Oct 2003 23:49:19 -0700
Content-transfer-encoding: 7bit
Content-type: text/plain; charset=US-ASCII
In-reply-to: <[email protected]>
References: <[email protected]>
Reply-to: Thomas Washburn <thomasw@xxxxxxxxxx>
Sender: owner-alfa@xxxxxxxxxx

"Riso, Antonio" <[email protected]> wrote:

> Can anybody on the list tell me what size is the nut holding 
> the pulley to the crank-shaft?

If your 164 has a V6, the crankshaft pulley nut size is 41mm.

41mm sockets are hard to find in the USA.  You might have an
easier time finding a 1 5/8" socket (41.275mm), which will
work fine.

Regards,
-Tom
[email protected]
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Prev by Date: [alfa] Air boxes and resonance
Next by Date: Re: [alfa] Engine cleaning (and detailing)
Previous by thread: [alfa] Air boxes and resonance
Next by thread: [alfa] Re: Alfetta GT interior light
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index