Re: [alfa] As the stud turns... conclusion!

To: alfa@xxxxxxxxxx
Subject: Re: [alfa] As the stud turns... conclusion!
From: "Dean W. Cains" <dwc@xxxxxx>
Date: Sun, 12 Oct 2003 00:01:10 -0400
Cc: Scott Johnson <scott@xxxxxxxx>
Content-type: text/plain; charset="us-ascii"; format=flowed
In-reply-to: <[email protected]>
References: <[email protected]>
Reply-to: "Dean W. Cains" <dwc@xxxxxx>
Sender: owner-alfa@xxxxxxxxxx

Hi Scott:

If you need new lug nuts, go to:

http://www.wheelsforless.com/Lug_Nuts.asp

Order the #ML5455-20, which are 12mm X 1.50 chrome bulge nuts. I bought a set a few months ago for my '87 Spider, for $19.95 shipped. A set is 20, so you'll have several extras, and they're very high quality, with a nice chrome finish. No need to pay IAP $5/nut. I'm assuming all the new studs you installed were RH thread, though.

Regards,

Dean

At 08:23 PM 10/11/2003, you wrote:

Date: Sat, 11 Oct 2003 20:18:41 -0400
From: Scott Johnson <[email protected]>
Subject: [alfa] As the stud turns... conclusion!

So now all I have to do is source a set of 12mm x 1.5 nuts. Seem common
enough, but predictably my local wimpy parts store was out. Ah well.

--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Follow-Ups:
- Re: [alfa] As the stud turns... conclusion!
  - From: Jorge Mazlumian

Prev by Date: [alfa] The Italian Job
Next by Date: Re: [alfa] As the stud turns... conclusion!
Previous by thread: [alfa] As the stud turns... conclusion!
Next by thread: Re: [alfa] As the stud turns... conclusion!
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index