Re: [alfa] Alfa V-6 conversion

[Mark Denovich <mark@xxxxxxxxxxxx>]

Robert Lesher wrote:

> Hi I'm seaking info. on after-market exaust headers, for the V-6, GTV-6
> or Milano. I am working on a driveline conversion on a 62 Fiat Ghia
> 1500GT. I was about to drop a 3.0 ltr alfaV-6, into the car, and found
> that the exaust manifolds, will not quite clear (sideways). Does anyone
> know if after-market headers, take up any less space. The stock manifolds
> takeup aprox 5"-6" from the side of the block, and also, will they clear
> the 164 oil sump that I must use? Does anyone have a set for sale? Bob
Where exactly do the stock manifolds foul, and by how much?

I've got CSC headers on my 3.0l (Milano Verde), and they are about as 
tight as you can go.  www.performatek.com is carrying them now, which is 
nice so you don't have to order them directly from Europe (like I did.)

If you give me some idea of what measurements you need I can probably 
get them.   I've got a 164 and a spare Milano 3.0l in my basement both 
with stock manifolds.

--Mark
The Alfa Wiki: http://alfa.denovich.org
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided