RE: Lower A-Arms

[Andy Kress <aokress@xxxxxxxxxxx>]

Jeff is correct, these are not like the usual bushing, more like a bearing 
in their action.  the inner crush tube is not supposed to turn on the A arm 
pin.  the inner tube is held to the A arm pin by the nut, the outer shell 
is pressed into and held by the control arm.  all rotation happens 
internally in the bushing.  If the center tube rotates on the control arm 
it will eventually score it and/or make it out of round.
The nuts for the A-arm are tightened to 64 lb ft
andy kress
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided