Re: swaybar bush

[Jon Pike <jhpike@xxxxxxx>]

I'll remember that  for later..  you never know..

My current plan is to wait for the IAP bushings (these were 
Centerline's) which I called and had them
measure first.  Their 30mm OD ones are the right (closer to 14.00 mm or 
.551" instead of .556-.558")
inside diameter,  so I probably won't have to use it this time..

Thanks!

Jon

Wilson J. Rugh wrote:


> Jon,
>
> Some time ago I posted to the AD the approach suggested by
> my mechanic when I had loose-fitting bushings. I dimpled the
> bar-end surface with a punch in several places and then slathered
> on some JB Weld and pushed on the bushing. It has held up
> fine for a couple of years now.
>
> HTH
>
> Jack
> _______________________
> Jack Rugh, Baltimore MD
> '69 GT Veloce
> '69 Berlina
> '72 Montreal
> '74 Spider
> ________________________
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided