Re: diff case fill hole? - thanks

["Todd Schinell" <alfatodd@xxxxxxxxxxx>]

Thanks everybody, I found the fill hole just looking underneath from the
back *duh*!  That valvoline pump device worked very nicely as well, it was a
good thing too because it was rather low and now the noise has gone away.
At some point I suppose I'll have to just replace whatever gasket is leaking
back there for a permanent fix.  Meanwhile it's nice simply not tearing up
my gears everywhere I go.  I guess the reason I couldn't see it the first
time was because the handbrake cable and boot are in front of it (still tho,
I musta been pretty blind)  And FWIW the size of the allen wrench is in fact
12mm, a big whopper that set me back $7 at sears.
___
 /<>/>/>
77 Spider
----- Original Message -----
From: "Brian Shorey" <bshorey@domain.elided>
To: "'Todd Schinell'" <alfatodd@domain.elided>
Sent: Tuesday, April 29, 2003 11:07 AM
Subject: RE: diff case fill hole?


> At the rear of the diff, in the center.  You don't need a mirror.
>
> It's got a recessed hex head filler plug in it.  Clean the area with
> carb cleaner before you remove it, to prevent grunge from getting into
> the diff.
>
> bs
>
> > -----Original Message-----
> > From: owner-alfa@domain.elided [mailto:owner-alfa@domain.elided] On
> > Behalf Of Todd Schinell
> > Sent: Tuesday, April 29, 2003 10:45 AM
> > To: alfa@domain.elided
> > Subject: diff case fill hole?
> >
> >
> > Where is the diff case filler hole on a 77 Spider?!?!  I got
> > my hands all
> > gunky last night feeling around up there to no avail.
> > Perhaps I need a mirror
> > to see it?  What kind of head does it have?
> > ___
> >  /<>/>/>
> > 77 Spider
> > --
> > to be removed from alfa, see /bin/digest-subs.cgi
> > or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided