Re: Spring Removal, Spider

To: skippatnode <skippatnode@xxxxxxx>
Subject: Re: Spring Removal, Spider
From: "Daegrigg (Don)" <daegrigg@xxxxxxxxxxx>
Date: Sun, 27 Apr 2003 07:43:55 -0400
Cc: alfa@xxxxxxxxxx
Content-transfer-encoding: 7bit
Content-type: text/plain; charset=iso-8859-1
References: <000a01c30b40$d3a76000$66db6044@your6jnhhu0520>
Reply-to: "Daegrigg (Don)" <daegrigg@xxxxxxxxxxx>
Sender: owner-alfa@xxxxxxxxxx

Skip,

What thickness plate?

----- Original Message -----
From: skippatnode <[email protected]>
To: alfa digest <[email protected]>
Sent: Friday, April 25, 2003 11:39 AM
Subject: RE: Spring Removal, Spider


> I also use the althread method to lower the front springs but I only use
two
> on opposite sides and I use a flat steel plate about 2 inches wide and
drilled
> at each end to accept the all thread.
> That eliminates messing with the washers and keeps everyting lined up
better.
> Skip Patnode
> 67 Duetto
> Norfolk, Va
> --
> to be removed from alfa, see /bin/digest-subs.cgi
> or email "unsubscribe alfa" to [email protected]
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

References:
- RE: Spring Removal, Spider
  - From: skippatnode

Prev by Date: Re: Milano torsion bar adjustment, stuck lower control arm
Next by Date: Re: tan GTV6 seats
Previous by thread: RE: Spring Removal, Spider
Next by thread: alfas in the movies
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index