Date: Tue, 22 Apr 2003 10:15:40 -0400 (EDT)
From: Richard Welty <[email protected]>
Subject:
On Tue, 22 Apr 2003 16:10:27 +0200 Luca <[email protected]> wrote:
2) You removed that part, and it had those holes from which you
removed
those screws. Do not throw the screws in the a box with all the
others.
Better putting the screws in those holes, and, using some tape, making
sure
they stay there.
i've been known to use zip lock bags, numbering them with a sharpie to
correspond with the steps in a procedure.
also, when you go to put it back together, consider using new fasteners
where reasonable. most of the metric stuff is pretty standard, really,
hard
to get at our local home depot because they don't really seem to care
about
that part of their fastener aisle, but any decent hardware store with a
midwest fastener display should be able to supply all the stock stuff.
richard
- --
Richard Welty
[email protected]
Averill Park Networking
518-573-7592
Unix, Linux, IP Network Engineering, Security