Alfa Romeo/Alfa Romeo Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re[2]: alfa-digest V9 #307 - ERW Roll Bar Tubing



On Sun, 2 Mar 2003 22:24:28 EST [email protected] wrote:
>  As Richard mentions, ERW is
> no 
> longer legal for SCCA.
>        There is a way to tell the difference that I learned at a seminar
> for 
> tech inspectors at an SCCA national convention.  SCCA requires a minimum
> 3/16 
> inspection hole in every tube in the cage which has a required dimension
> - 
> which means about all of them.  Take a strong piece of wire with a hook
> bent 
> in the end.  

i have a pick set i bought at home despot for this purpose.

additionally, the Autopower is bolt in. you may well be able to get access
to the inside of the cage if it isn't installed in the car. the seam is
generally extremely obvious.

richard
--
Richard Welty                                         [email protected]
Averill Park Networking                                         518-573-7592
              Unix, Linux, IP Network Engineering, Security
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]


Home | Archive | Main Index | Thread Index