valve and ignition timing

To: <[email protected]>
Subject: valve and ignition timing
From: "Ed & Marsha Prytherch" <[email protected]>
Date: Fri, 14 Feb 2003 23:34:45 -0500
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="Windows-1252"
Reply-to: "Ed & Marsha Prytherch" <[email protected]>
Sender: [email protected]

I am rebuilding my 79 spider engine. I have timed the cams with a degree
disc attached in place of the flywheel, but the distributor is 180 degrees
out. The coupling on the end of the distributor shaft seems to prevent it
from being rotated through 180. Can I just rotate the distributor cap
through 180 or do I have to re-do the valve timing?

Thanks.

Ed Prytherch, Columbia SC
73 GTV
79 Spider
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Follow-Ups:
- Re: valve and ignition timing
  - From: "Thomas Moll" <[email protected]>

Prev by Date: Re: 74 GTV starter problem
Next by Date: Re: valve and ignition timing
Previous by thread: DEAD CARS
Next by thread: Re: valve and ignition timing
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index