Re: Milano verde Twin Turbo wow

[Zamani Zambri <zzambrimail@domain.elided>]

Hi,

I personally don't think 240 bhp is achieveable from a milano with
shaved heads, S-cams, porting and exhaust work. That would put you at
about 210-215 bhp. Refer to the european car magazine Milano project
car.

Here is what you need for ~240 bhp.
Colombo Cams (104.292 cams from ebspares)
At least 10:1 pistons or custom (longer) rods (try not to shave the
heads)
Some porting
Headers with big primaries (~1.625" or 1.75") and nice collectors
(burnsstainless.com comes to mind)
Good exhaust system, preferrably, 2.5"
Bigger air flow meter
Higher pressure regulator (47 psi or thereabouts)

Best is to rid yourself of the L-Jetronic. It sucks. Get something
decent if you are going to all that trouble. For power, I think even
webers are better. But the SA GTV6 3.0 carb heads are EXPENSIVE.

Megasuirt sounds good. Or Domingo (also from South Africa). Microtech,
Motec and Autronic are also good. I would go for Autronic. It's a good
system. I use it and I like it.

But it's still no match for a turbo (or two). 250 bhp from a twin turbo
3.0 is a very conservative figure. The 75 3.0 TT in Holland has way
more than that. Supposedly close to 400bhp. 

I would like to have a turbo car as well, but so far am having enough
on my hands with my mildly modified 3.0 (specs similar to the above).
The power of a well tuned turbo is way better than the NA. 

It won't be cheap so good luck.

Zamani
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided