RE: Italian Design - Total Insanity

To: "'Karl Chen'" <[email protected]>, <[email protected]>
Subject: RE: Italian Design - Total Insanity
From: "Brian Shorey" <[email protected]>
Date: Mon, 3 Feb 2003 21:46:12 -0500
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="us-ascii"
In-reply-to: <[email protected]>
Organization: Cisco Systems, Inc
Reply-to: "Brian Shorey" <[email protected]>
Sender: [email protected]

> I have found why my auto transmission would not drop.
> There is a third starter motor bolt hidden well out
> of reach of humanity.  If I could remove the heat shield
> I may have a chance - just maybe.  But the heat shield is
> RIVETED to exhaust manifold - unlike service manual which
> showing it bolted to manifold.  At this point I am stuck.
> Removing manifold as I can see probably require removing
> engine.

I don't own a 164, but I'll ask the stupid (obvious) question - why not
just drill out the rivets for the heat shield, then bolt it back in when
it comes time to put it all back together?

bs
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

References:
- Italian Design - Total Insanity
  - From: "Karl Chen" <[email protected]>

Prev by Date: anybody selling milano verde Dial tone rims..they have to be "dial tone"
Next by Date: The motor is: Out
Previous by thread: Re: Italian Design - Total Insanity -Some help.
Next by thread: RE: Italian Design - Total Insanity
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index