Milano Injection Woe - Please Help!

[JPardillo@domain.elided]

Hi
I am looking for some advice on getting my 1987 Milano Gold to go Vroom Vroom.
I bought this car as non-running about one year ago. It had obviously jumped cam timing but otherwise was a clean example with 62K miles. It had been sitting for a while too.
I changed the belt and tryed to start it but it seemed to be getting no fuel. I had the injectors cleaned and calibrated at the local diesel injector shop. The pressure relief valve was bad so I swapped that and the fuel pump out of my running GTV-6 (needs guibos) and the cold-start injector also.
It would now crank and kick off the cold start and I could run it a bit longer at idle by sticking a gas-soaked rag in the intake box (don't try this at home).
So I guess I am pretty sure it is in the electronics.
I tried the ECU from the GTV-6 with no luck. Would the 1981 GTV-6 ECU work in the Milano?
Is there some way to check the ECU?
Any other ideas as to what might be the problem?
Thanks in advance!!
John
alfadog
'87 Milano
'81 GTV-6
Both need help
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided