Alfa Romeo/Alfa Romeo Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
18 - 89 Fuel rail rebuild more info
- To: <[email protected]>
- Subject: 18 - 89 Fuel rail rebuild more info
- From: "dan" <[email protected]>
- Date: Mon, 13 Jan 2003 13:55:50 -0600
- Content-transfer-encoding: 7bit
- Content-type: text/plain; charset="us-ascii"
- In-reply-to: <70C5A92F20E4D611908400508B50F6C6019F8D6C@EXCHANGE>
- Reply-to: "dan" <[email protected]>
- Sender: [email protected]
Damien,
I just did this.. The hose I used was 5/16" inner diameter fuel hose
from O'Reillys. You'll need four 2-1/8" long pieces for the injectors
and one 8 1/4" long piece for the cold start solenoid. The old hoses
are hard to get off because of those metal caps, I read a trick in Alfa
Owner about using a drill bit to split the ends of the hose up into the
caps. I agree, buy new upper & lower seals too. The old upper seals
are easy to cut off, then slip on new ones from the bottom. The
write-up isn't done yet but you can see some pics of my "fuel rail
rebuild" here:
http://kcaroc.pcbs.net/techses/89rebuild6/thumbs.asp
Dan in kc, 89 spider
- -----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
Damien Gaboury
Sent: Monday, January 13, 2003 12:02 PM
To: [email protected]
Subject: Fuel rack Spider 81-89
Hi all,
On Bosch injected spider from 81 to 89, is it possible to replace the
rubber
hoses on the fuel rack, I mean the hoses linking the fuel injector and
the
rack, or the fuel rack comes complete ?
Anybody know a place where I can buy such a fuel rack ?
Thanks all
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
Home |
Archive |
Main Index |
Thread Index