Entire Alfa V6 addiction for sale or trade in Michigan, USA

[Brad Porter <zarda124@domain.elided>]

Hello all,

        With a heavy heart, I am considering offering my entire collection 
of Alfa V6 cars, engines and parts for sale or trade.  I live in mid 
Michigan (near Lansing) and I've amassed quite a collection of stuff.  I've 
been trying (not hard enough, sadly) for several years to find the time and 
energy to put together a couple of cars.  My situation has changed, 
however, and my wife and I are now getting ready to buy a new home, so I've 
decided that it is time to pass everything I've got on to someone with more 
time and dedication.  Here's a quick run down of the things I can think of 
off the top of my head that I've got:

- 1983 GTV6, silver - Originally a Florida car, with only a few minor (in 
GTV6 terms) rust spots - most notably at the base of the A-pillars, the 
bottom of the front wheel wells (behind the tire), the front clip, the 
hatchback's weather seal lip and the bottom rear of the hatchback.  There 
is no rust at the top of the shock mounts, or any other structural rust 
that I know of.  I began disassembling this car to fix the rust and prep it 
for track duty, but I never got much past the disassembly stage.  The 
doors, trim, windshield, grill/lights and interior have been removed -- 
everything is labeled, and parts and fasteners are in marked bags and boxes 
(for the most part).  The car has been stored inside since it's disassembly 
began.

- 1985 (late) GTV6 - This car is complete and has a fairly good black 
velour interior (cracked dash, of course, and some wear on the drivers 
seat), but it has terminal structural rust - strangely, the hood and 
hatchback have less rust than the '83 car, though.  This was to be a parts 
car, but I wound up driving it for about a year before the starter went 
bad, which was about 3 or 4 years ago.  It's been sitting every since - up 
on jackstands in my garage for most of the time.  The car is currently 
mounted with Campy 15'' rims and practically new Dunlop D40-M2's.

- 1989 Milano Gold - white.  This car has 95k miles and is in exceptional 
shape, except for the engine and it's broken/bent pushrods and valves in 
one of the heads.  The car was brought to Grand Rapids, Michigan from 
Florida by an Alfa enthusiast.  Shortly after moving here, the timing belt 
skipped and he decided to sell it so that he could concentrate on his 
four-cylinder Alfas, and his adorable and beautifully restored old Fiat, 
which I can't remember the model name, which looked like a comical '60s 
mini-mini-van.  Back to the Milano... this car has absolutely no rust in 
those places where Milanos rust (trunk lid, wheel arches), and if you act 
now, you'll get a sweet motor to put into it (see below)... which reminds 
me, the old broken motor has been removed.

- Several V6 engines - Most notably, I have two 3.0 liter 164 motors (each 
with about 40k miles) complete with accessories, oil coolers, 
intake/exhaust manifolds, AFMs, wire harnesses and Motronic injection 
computers.  I've started converting the first of these two engines for 
installation in the Milano - so far I've stripped the 164 accessories and 
installed the oil pump drive gears (required to drive the Milano 
distributor).  This motor has Motronic 4.0 (I think that's the version) 
digital injection.  The second of these two motors is a real prize -- it is 
a two-valve 3.0 with the same distributorless Motronic injection that was 
offered here in the States on the LS 4-cam motor.  It also has oil 
squirters that cool the bottoms of the pistons (turbo upgrade, 
anyone?).  This engine was originally in a car that was used by Alfa USA 
during initial emissions testing and federalization for this powerplant... 
then Alfa decided not to offer a two valve engine in 1994, so you won't 
find many (if any) engines with this exact configuration on this side of 
the pond.  This engine is fully intact with accessories, intake/exhaust 
manifolds and a 5-speed transmission still attached.  In addition to these 
two very nice 3.0's I have the broken 2.5 from the Milano, another complete 
2.5, and a (complete?) disassembled 2.5... and several boxes of parts.  The 
last two 2.5's and parts came along with the Milano when I bought it.

- New, never used parts - To complete the the 3.0 Milano conversion: V6 oil 
pump, water pump, timing belt, gaskets, seals, water pump hoses (those two 
little expensive custom molded ones), European 164 v-belt water pump 
pulley.  Other parts: another timing belt, hydraulic detensioner rebuild 
kit, set of front-end suspension bushings, ball joints and castor link pads 
for GTV6, pair of rear brake discs, two GTV6 grill/hatchback badges, GTV6 
upper and lower radiator hoses.

- Used parts (these are in addition to the parts that go with the above 
cars and motors): Milano Verde flywheel (with bolts) and European 3.0 164 
v-belt crank pulley (both required to correctly balance the 3.0 for 
installation in a transaxle car), at least one (maybe two) pair of Milano 
Verde exhaust manifolds, Euro 164 downpipes, another European 164 v-belt 
water pump pulley, GTV6 gas tank, set of four Campy rims with snow tires 
(which, unlike the ones on the '85 GTV6, have some corrosion around the lug 
holes), Verde driveshaft, Verde shifter and linkage, pair of Ricambi Super 
Sport rear springs, pair of Koni adjustable shocks (can't remember if these 
were for the front or rear), 2.5 AFM, "V6 3.0" trunk badge from a Verde, 
pair of GTV6 tail lights (one broken)... and a bunch of other stuff I can't 
remember at the moment.

        If you're interested in a trade, here are some things that I would 
consider for full or partial trade: a GTV6, Verde or pre-Alfetta GTV in 
exceptional condition, a Q4 (it doesn't hurt to ask...), an AWD Subaru or 
Audi in good shape (please don't bother offering me any sort of sport-ute), 
a Toyota MR2 (2nd generation turbo, or a Spyder), Acura NSX, some other 
sporty or interesting RWD or AWD car in good shape, a nice horse trailer, 
set of OEM Acura NSX 7-spoke rims, lifetime supply of Loctite 242, gold 
bars, a test drive of that yellow Elise that someone's been driving to the 
Lotus office in Ann Arbor, a test drive of the new Maseratti coupe that 
Automobile magazine had a few weeks ago (I don't think they still have 
it... damn), a car hoist for my garage... or anything else you might have 
that's interesting.  Also, I've listed all the Alfa stuff I own, but I may 
sell/trade only some of it... it just depends on what sorts of offers I 
get.  I may, for instance, keep one of the 164 3.0's and sell the rest, or 
perhaps someone wants to just buy the one GTV6, or the complete 3.0 with 
transmission, or perhaps just the Milano along with the engine and parts 
needed to complete the engine swap... I might go for that.  What I don't 
want to do is sell individual parts to dozens of different people... I just 
don't have the time, so please don't ask to buy the Verde flywheel (it took 
me MONTHS to track down a used one), or any other individual part.

        Thanks for reading this far,
        -Brad Porter
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided