Help--74 Spica--adjuster screw under TA turned all the way

["Rotondi, Armando" <rotondiaj@domain.elided>]

> Hello all,
> 
> I have had a "slightly" mis-adjusted Spica for several years now, and
> decided that the digest would be a great place to get some help.  Here is
> the issue. The screw that is part of the plunger, which is under the
> thermostatic actuator, and is used to adjust the distance between the
> lever that the "long link" attaches to and the reference screw, is screwed
> all the way in.  I got the car about 8 years ago, and I had to set it this
> way the first time that I tuned it. At the time, it didn't seem right so I
> took it to a shop that is very good with Alfas and they agreed that the
> screw needed to be all the way in.  Eventhough the screw is all the way
> in, the gap is less than 0.019".   I've lived with it, but I am wondering
> what can be done to bring the gap up to where it should be? 
> 
> Regards,
> Armando Rotondi
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided