Re: Head Gasket Questions

To: <[email protected]>
Subject: Re: Head Gasket Questions
From: "Tom Sanor" <[email protected]>
Date: Wed, 9 Oct 2002 18:30:31 -0400
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="iso-8859-1"
References: <[email protected]>
Reply-to: "Tom Sanor" <[email protected]>
Sender: [email protected]

It's not clean enough.  Take a single edge razor blade and hold it
vertically and firmly scrape back and forth.  Do not angle the blade.
Pretty easy once you've tried it.  Then follow up with lacquer thinner to
really clean the surface.  You'll be surprised how much cleaner you can get
it (bare aluminum).

Mr. Goose
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Prev by Date: RE: gas
Next by Date: Spider motor mounts a weak point?
Previous by thread: Head gasket questions
Next by thread: Re: Head Gasket Questions
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index