Re: injectors and injector hose clamps

[Ralph Moorhouse <ralphmo@domain.elided>]

Marren Fuel Injection has worked well for cleaning (and FAST) for me a 
couple of times (<$25/injector).  Apparently good injectors are often way 
off and variable between injectors.  Marren will get them very close
http://www.injector.com/

Ralph
Houston, TX

At 10:09 AM 10/8/2002, Garcia, Andrew G wrote:

>         I  have always used fuel injection clamps when replacing the short
> rubber hoses. I have seen more V6 engine fires because of  a fuel leak in
> this area. The clamps cost around $2 each.
>
>         Less than 10% on injectors is a lot of variance. Typically after I
> have my injectors professional cleaned they are exactly the same - pattern,
> flow, etc. Any time I seen an variance in the injectors, I send them off to
> be cleaned. At a cost of around $150 to have them all cleaned, it is much
> cheaper than replacing them.
>
>         ANDREWG
>         Houston, TX
>         82 GTV6 ITS #68
>         85 GTV6
>         88 Milano Verde
> --
> to be removed from alfa, see /bin/digest-subs.cgi
> or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided